28
29
Set up the refresh interval [Refresh interval]
Select the image refresh interval for each camera and transmit it to the cameras to change the camera settings.
Clicking the [Setup >] button for "Refresh interval" on the [Camera setup] tab will display the setup page.
[Refresh interval]
Select an interval to update the image display. If used
in a network environment where frequent errors
occur, shorten the refresh interval to reduce image
distortions. However, the refresh interval may be
longer than the set value.
0.2 s/ 0.5 s/ 1 s/ 2 s/ 3 s
■
Camera Selection
Select the camera to which the setting of the "Refresh
interval" is to be sent.
Mark the checkbox of the camera to which the setup
information is to be transmitted.
[Transmission] button
Transmit the setting of the "Refresh interval" to the
camera.
Once transmission is completed and the setting has
been applied to the camera, "OK" will be displayed in
the "Results" field.
If the display reads "Authentication error", etc., the
camera connection or the setting may have failed.
[Back] button
Click the button after completing the settings.
The screen returns to the [Camera setup] tab.
Important:
Image transmission from the camera will tempo-
•
rarily be canceled and no image will be recorded
during this period if the setting to change the
refresh interval is transmitted to the camera.
