Panasonic U-8ME1E81, Руководство по обслуживанию

Страница: 30 / 105

2 -8
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
2WAY SYSTEM
Remote Controller Functions
3. Detailed Settings Function
The flap swings during the operation under "Setting the
Flap Separately".
At this time, the unselected flaps are moved to the
position 1 . (refer to Fig. 2-4)
* Setting data “ ” (refer to Fig. 2-4)
Flap position 1
5
7
Press the timer time
the desired setting data. / buttons to select
(The display stops blinking and remains lit, and setting
is completed.)
If you wish to change the selected indoor unit, follow
the step .
2
6 Press the button.
Press the
controller display.
button to return to normal remote
2
3
4
5
6
1
7
When the flap position is set to 4 or 5 and the unit
is in the cooling or dry mode, the flap position is moved
to 3 and the operation is started. (refer to Fig. 2-4)
Flap position during operation Setting data
Move to position 1 and stay
Without separate setting
Swing
Move to position 2 and stay
Move to position 3 and stay
Move to position 4 and stay
Move to position 5 and stay
2
3
4
5
Fig. 2-4
NOTE
Setting the Flap Separately (When setting the CZ-RTC2)
1) The 4-air outlet flap can be adjusted separately during
operation. When not adjusted separately, all flaps operate
in the same manner.
<Procedure>
Stop the system before performing these steps.
4
1 Press and hold the
simultaneously for 4 seconds or longer.
,
and buttons
2 If group control is in effect, press the
button and select the address (unit No.) of the
indoor unit to set. At this time, the fan at the indoor
unit begins operating.
Designate the item code “
Temperature Setting
buttons. /
“ by adjusting the
3 “
,” unit No. “
=91
=90
” (or “ ” in the case of
group control), item code “ ,” and settings data
controller LCD display.
“ ” are displayed blinking on the remote
=92
=93
Air discharge
port
Flap
(adjustment for up-down airflow direction)
Electrical component box
Flap 1
Flap 3
Flap 2 Flap 4
<Procedure of CZ-RTC3>
Fig. 2-5
CZ-RTC3
START
[ ]
20:30 (THU)
1
Keep pressing the , and
buttons simultaneously for 4 or more seconds.
The “Maintenance func” screen appears on the
LCD display.
2
Press the or button to see each
menu.
If you wish to see the next screen instantly, press
the
or button.
Select “8. Detailed settings” on the LCD display
and press the
button.
The “Detailed settings” screen appears on the
LCD display.
Select the “Unit no.” by pressing the
or
button for changes.
Detailed settings
Unit no. Code no. Set data
3-1
20:30 (THU)
10 0001
[ ] Confirm Sel.
3
Select the “Code no.” by pressing the or
button.
Change the “Code no.” by pressing the or
button (or keeping it pressed).
4
Select the “Set data” by pressing the or
button.
Select one of the “Set data” by pressing the
or button.
Then press the button.
5
Select the “Unit no.” by pressing the or
button and press the button.
The “Exit detailed settings and restart?” (Detailed
setting-end) screen appears on the LCD display.
Select “YES” and press the
button.
Maintenance func
1. Outdoor unit error data
2. Service contact
3. RC setting mode
4.Test run
Sel. Page [ ] Confirm
20:30 (THU)
Maintenance func
5. Sensor info.
6. Servicing check
8. Detailed settings
Sel. Page [ ] Confirm
20:30 (THU)
7. Simple settings
Detailed settings
Unit no. Code no. Set data
10 3-1 0001
Sel. Next
20:30 (THU)
Detailed settings
Unit no. Code no. Set data
3-1 0001
Sel. Next
20:30 (THU)
10
Detailed settings
Unit no. Code no. Set data
ALL
Sel. Next
20:30 (THU)
01 0002
Exit detailed settings
and restart?
NO YES
SM830205-04_2WAY_VRF_Euro.indb 8 2015/01/23 11:53:23