37
English
Note
●
Displays the signal name as set in [Input label]. (see
page 65)
●
Input will not be switched unless [Input lock] is set to
[Off]. (see page 71)
●
Image retention may occur on the LCD liquid crystal
panel when a still picture is kept on the panel for
an extended period. To prevent such a problem,
using the screensaver and the [Wobbling] function is
recommended. (see page 64, 65)
●
Switching to another input while the unit is connected
to Screen Transfer with Screen Transfer input will
break the connection. Check the connection again
after switching the input.
RECALL
It is possible to check the setting status of input label,
picture mode, etc.
Press <RECALL>.
Current setting status will be displayed.
10:00
1
2
7
8
3
4
5
6
HDMI1
Full
AUDIO IN
Memory name: MEMORY2
Schedule play mode
Off timer
90 min
Backup mode OK
1
Input label
2
Aspect mode (see page 39)
3
Backup input change (see page 63, 63)
4
Audio input (see page 68)
5
Profile name (see page 50)
6
[Schedule play mode] (see page 117)
7
Off timer remaining time (see page 38)
8
Clock / Mute (see page 38, 73)
●
When there is no video signal to the selected input,
[No signal] is displayed for about 30 seconds at the
end.
●
When a USB memory is not connected to the USB
terminal at the time of switching to the USB input, [No
external media] is displayed for about 30 seconds.
Even when a USB memory is connected, if it does not
contain any playable file, [No play file] is displayed at
all times.
●
When [No signal image settings] - [Display setting] is
set to [On] (see page 70), the message [No signal] /
[No external media] / [No play file] are not displayed.
Instead, the image set in [No signal image settings]
will be displayed.
●
To display the clock, set [Date and time] and then set
[Clock display] to [On]. (see page 72)
