130
English
8
Select [Execute] with
and press
<ENTER>.
SQ1H-001
SQ1H-002
SQ1H-004
SQ1H-005
SQ1H-014
SQ1H-006
SQ1H-041
SQ1H-009
192.168. 0. 1
192.168. 0. 2
192.168. 0. 4
192.168. 0. 25
192.168. 0. 31
192.168. 0. 7
192.168. 0.124
LAN data cloning
Status
Execute
Display name
IP address
Select display
Off
Write protect
Note
●
Data cannot be copied to the display for which
[Write protect] is set to [On]. Set this to [On] to
prevent [LAN data cloning] from being performed
mistakenly when data copy is not necessary.
●
Once [LAN data cloning] is performed, [Write
protect] is set to [On].
9
A confirmation window appears.
Select [Execute] with and press
<ENTER>.
All data for the selected displays will be changed.
Are you sure you want to execute?
Execute
Return
LAN data cloning
Data copy to the display starts.
LAN data cloning
Cloning in progress, please wait.
DO NOT unplug your Display!
10
The exit screen appears.
The blue mark on the list shows the data has been
copied successfully. The red mark shows failure.
If the red mark appears, check the LAN cable
connection or power status of the display of the copy
destination.
SQ1H-001
SQ1H-002
SQ1H-004
SQ1H-005
SQ1H-014
SQ1H-006
SQ1H-041
SQ1H-009
192.168. 0. 1
192.168. 0. 2
192.168. 0. 4
192.168. 0. 25
192.168. 0. 31
192.168. 0. 7
192.168. 0.124
192.168. 0.211
LAN data cloning
Status
Cloning finished.
Display name
IP address
If the data copy has finished, the message appears
on the display of the copy destination.
Cloning finished. Please turn off the power.
11
Press the power button on the remote
control to turn the power off, and
then turn the power on. Or remove
the power plug from the outlet once,
wait for 30 seconds or more, and then
insert the power plug.
The copied content is applied to the display.
Changing the cloning password
Changes the cloning password required
to use the cloning function.
1
Display [Setup] menu pressing
<SETUP>.
2
Select [Options] with
and press
<ENTER>.
The following display appears.
Display information
Options
Software licenses
Cloning password
USB data cloning
Security password
LAN data cloning
Output log data
Shipping
3
Select [Cloning password] with
and press <ENTER>.
[Cloning password] screen is displayed.
4
Enter the current password, and press
[Ok].
5
Enter the new password, and press
[Ok].
6
Enter the new password again for
confirmation, and press [Ok].
Note
●
The initial password in the factory default state is
[AAAA].
●
Change the password periodically, and set one which
is difficult to guess.
●
For initialization method for the cloning password,
consult the dealer where you purchased the product.
