60
English
■
[Information(Display upside-down)]
Sets the display/non-display of a message that tells
the unit is not installed in the correct orientation when
the power is turned on.
(About [Display orientation], see page 84)
[On]:
The message is displayed when the power is
turned on.
[Off]:
The message is not displayed when the power is
turned on.
Note
●
If a reverse installation message is displayed, other
messages at power-on are not displayed.
■
[Quick start]
This function quickly turns the power on at power-on.
[On]:
Quickly turns the power on at power-on.
[Off]:
Turns the power on in a usual manner at power-on.
Note
●
When this function is set to [On], power consumption
is increased in standby mode.
Input search
When a signal is not detected, another input with a
signal is automatically selected.
Note
●
MEMORY VIEWER / Screen Transfer input is
excluded from this function.
Input search
Input search
1st search input
2nd search input
Custom
(None)
(None)
■
[Input search]
[Off]:
When there is no signal, the input is
not switched automatically.
[All
inputs]:
Searches all inputs and switches to an
input with a signal.
Input search is executed in the
following order.
Example: When the current input is
HDMI1
[HDMI2
] → [
DisplayPort
] → [
DIGITAL
LINK
] → [DVI-D
] (or [SLOT
]) →
[USB] (or [Internal Memory
]) →
[HDMI1
] →
Note
●
The inputs set to [(Skip)] in [Input label] (see page 65)
are skipped when searching.
[Custom]:
Repeatedly searches [Current input],
[1st search input] and [2nd search
input] in order, and switches to an input
with a signal.
[Input
detection]:
Monitors the inputs set to [On], detect
the status change from no signal to
signal present, and switches to the
input.
HDMI1
Searching...
[Searching...] is displayed during the input search.
■
[Input search]: [Custom]
[1st search input], [2nd search input]
Set the input to search when [Custom] is selected.
[HDMI1] / [HDMI2] / [DisplayPort] / [DIGITAL
LINK] / [
DVI-D
] / [SLOT] / [USB/Internal Memory]
/ [(None)]
■
[Input search]: [Input detection]
Input search
Input search
HDMI1
DVI-D
HDMI2
Input detection
Off
Off
Off
Changing delay
Off
DisplayPort
Off
DIGITAL LINK
Off
Sets the input to monitor during [Input detection].
[HDMI1] / [HDMI2] / [DisplayPort] / [DIGITAL LINK]
/ [
DVI-D
]
[Off]:
The input is not monitored.
[On]:
The input is monitored.
■
[Changing delay]
Sets the delay time until the input is switched during
[Input detection].
[Off]:
Switches the input if a signal is interrupted
even for a very short period.
1 ‒ 10:
Sets the delay time (sec.).
Switches the input when the set time has
elapsed after detecting no signal is present.
However, if the detection period during
which no signal is present is shorter than the
set delay time, the input is not switched.
Note
●
[Input detection] is the function that automatically
switches the input as below by monitoring the
presence of signal for the set input.
•
If a video signal is input to the set input that is
not displayed (When the status has changed
from signal absent to signal present.), the input is
selected and switched.
