98
English
5
Enter the new user name and password, and
then click [Change].
The screen of step 3 is displayed again.
6
Enter the new user name and password.
Enter the new user name and password set in step
5.
7
Click [OK].
Note
●
The password used here is common to the password
specified in [Network settings] - [Administrator
account settings]. (see page 74)
●
The default settings are as described below:
•
Administrator privilege
Specify the user name and password you set for
[Administrator account settings]. (see page 35)
•
User permission
User name: dispuser
Password: None
Change password first.
●
When [Reset] for [Network settings] of this unit is
executed, the password change is also required after
log-in. (see page 78)
●
The password can be changed on the Password
Setup screen after logging in (see page 103). The
user name can be changed when connecting by
logging in with administer privileges.
●
If a wrong user name/password is entered 3 times
when you log in, the field will be locked for several
minutes.
●
When using [Detailed set up] (see page 99) or
“Crestron Connected” (see page 105), log in with the
administrator rights.
●
Depending on the browser, displayed operations may
change.
●
Under no circumstances, Panasonic Corporation or
its associated companies will ask customers their
password directly.
Even if you are asked directly, please do not reveal
your password.
Operating with Web Browser
■
Description of each section
Page tab
Click these to switch pages.
[Status]
Click this item, and the status of the Display is
displayed.
[Display control]
Click this item to display the Display control page.
[Detailed set up]
Click this item to display the advanced settings
page.
[Change password]
[Crestron Connected]
Click this item to display the Crestron Connected
operation page.
[Download]
Click this item to display the page to download the
dedicated application, [Screen Transfer].
[Browser Remote Control]
Click this item to display the Browser Remote
Control on the WEB browser, which is the same as
the supplied remote control.
■
Display status page
Displays the display status.
Click [Status
] → [
Display status].
Displays the type of Display.
Displays the firmware version of the display.
