119
English
■
Disabled functions
The following main unit’s functions are set to [Disable
(Off)] during schedule play mode.
●
[Set up timer]
●
[Screensaver]
●
“Power management” function
●
[No signal power off]
●
[HDMI-CEC settings]
●
[No activity power off]
●
[OSD transparency]
●
[Image settings] (Reading user image is disabled.)
●
[Input search]
●
[Initial input]
●
[Input lock]
●
[Failover/Failback]
Note
●
Disabled functions are greyed out on the on-screen
menu. Also, serial commands are in [ER401] state
(Including the inquiry command).
●
During schedule play mode, disabled functions
are set to [Disable (Off)], and those operations are
forcibly stopped.
●
When schedule play mode has finished, the disabled
functions are restored to the original setting values.
●
For [Multi display settings] – [Multi screen display],
only [Horizontal scale], [Vertical scale] and [Location]
can be set. [Bezel H adjustment] and [Bezel V
adjustment] cannot be set.
●
[Multi display settings] – [Multi input display] cannot
be set to [On] during schedule play mode. Also,
[Schedule play function] cannot be set to [Enable]
when [Multi display settings] – [Multi input display] is
set to [On].
■
Resume play
Sets the operation when the schedule playback is
restored again after schedule play mode is stopped
once.
When set to [On]:
The previous content before schedule play mode is
stopped is played back from the beginning.
When set to [Off]:
The playlist scheduled to be played back at the
current time is played back from the beginning.
Note
●
When playback is scheduled in the synchronized
playback mode, the playback is performed according
to the set time in both [On] and [Off] cases.
Using “Memory
viewer”
The “Memory viewer” selects still pictures and motion
pictures stored in a USB memory device or internal
memory, and show them on the display.
Note
●
This section describes the function on the premise
that a USB memory device connected to the USB
terminal is used.
When [Use memory select] is set to [Internal
memory], the internal memory is used.
Preparation
■
The files you can display with the “Memory
viewer”
The following files are supported.
Still pictures
Extension Format
Limitation
jpg/
jpeg/
jpe
JPEG
Number of pixels:
Minimum 32 x 32, Maximum
4 096 x 4 096
(supports baseline only)
YUV format: supports
YUV444, YUV442 and
YUV440
Colour mode:
supports RGB only
bmp
Windows
Bitmap
Number of pixels: Minimum
32 x 32, Maximum 4 096
x 4 096
(1 bit, 4 bits, 8 bits, 24 bits)
Following formats are not
supported:
Run-length encoding, bit
field, top-down, transparent
data
If the number of pixels
exceeds 1 920 x 1 080, a
long time may be required
to display content.
Motion pictures
Extension Codec
Video
Audio
avi
H.264/MPEG4
AVC
AAC-LC/LPCM/MP/
WMA Standard
MPEG4 Visual
VC-1 Advanced
VC-1 Simple &
Main
