Panasonic SF-C21, Инструкция по эксплуатации

Страница: 48 / 126

© Panasonic Industrial Devices SUNX Co., Ltd. 2016 48
Functions
3-12 Logic Settings by Software Tool
The software tool is available to change the settings of the following items. When logics are set,
control output 1 / 2 maintains OFF status. For details, refer to “
Chapter 5 Software Tool
.”
<Setting item>
● Input mode
● Logic setting
● Output mode (OFF delay, reset)
● Auxiliary output mode
<Detailed setting item>
● Input mismatch allowable time
● Input filter time
● ON delay time
● Allowable time difference in muting input
● Muting duration
● Exit-only muting time
● Muting input condition
● Override duration
● MODBUS (RS-485) communication conditions (Baud rate, parity bit presence, parity bit type,
stop bit, and communication address)
Item Setting range Factory default (Note 1)
Input mismatch allowable time 0 (unlimited) to 60 sec. (in units of 0.01 sec.) 1 sec.
Input filter time
ON - OFF
0 to 1 sec. (in units of 0.01 sec.) 0 sec.
OFF - ON
ON delay time 0 to 5,940 sec. (in units of 0.1 sec.) 0 sec.
OFF delay time 0 to 60 sec. (in units of 0.1 sec.) 0 sec.
Allowable time
difference in
muting input
Parallel muting 1 to 10 sec. (in units of 1 sec.) 3 sec.
Sequential muting 0 (unlimited) to 288,000 sec. (in units of 1 sec.) 288,000 sec.
Muting duration 0 (unlimited) to 5,940 sec. (in units of 1 sec.) 5,940 sec.
Exit-only muting time (Note 2) 1 to 4 sec. (in units of 0.1 sec.) 0 sec.
Muting input condition No priority/A priority/B (D) Priority No priority
Override duration 1 to 600 sec. (in units of 1 sec.) 60 sec.
RS-485
communication
condition
Baud rate 9,600 bps to 115,200 bps 9,600 bps
Parity bit presence Without / With With
Parity bit type Odd / even Odd
Stop bit 1 bit / 2 bits 1 bit
Communication address 1 to 247 1
Notes: 1) Preset logic is fixed.
2) This setting in only for parallel muting.
Factory settings of customizable logics are invalid.