Panasonic S-71WF3E Скачать руководство пользователя страница 123

Страница: 123 / 313

123

CZ-RTC4 (Timer remote controller)
<If 1 indoor unit is connected to 1 remote controller>

(1) Press and hold the

button and

button

for 4 seconds or longer (simple settings mode).

(2) The address is displayed for the indoor unit that is

connected to the remote controller.
(Only the address of the indoor unit that is
connected to the remote controller can be
checked.)

(3) Press the

button again to return to normal

remote controller mode.

Number changes to indicate which

indoor unit is currently selected.

Indoor unit address

<If multiple indoor units are connected to 1 remote controller (group control)>

(1) Press and hold the

button and

button

for 4 seconds or longer (simple settings mode).

(2) “ALL” is displayed on the remote controller.

(3) Next, press the

button.

(4) The address is displayed for 1 of the indoor units

which is connected to the remote controller.
Check that the fan of that indoor unit starts and
that air is discharged.

(5) Press the

button again and check the

address of each indoor unit in sequence.

(6) Press the

button again to return to normal

remote controller mode.

Number changes to indicate which

indoor unit is currently selected.

Indoor unit address

12.1.8.7 Test Run Using the Remote Controller

CZ-RTC5B (High-spec wired remote controller)

(1) Keep pressing the

and

buttons

simultaneously for 4 or more seconds.
The “Maintenance func” screen appears on the
LCD display.

20:30 (THU)

(2) Press the

button to see each menu.

If you wish to see the next screen instantly, press

the

button.

Select “4. Test run” on the LCD display and press

the

button.

Maintenance func

1. Outdoor unit error data
2. Service contact
3. RC setting mode

4. Test run

Sel. Page [ ] Confirm

20:30 (THU)

START

[ ]

CZ-RTC5B

Change the display from “OFF” to “ON” by

pressing the

button. Then press

the

button.

[ ] Confirm

Test run

Change

20:30 (THU)

Test run

Содержание S-71WF3E


























































































































































































































































































































Результаты поиска

Содержание S-71WF3E

Отзывы:

Бренды по названию

Популярные бренды

Panasonic S-71WF3E, Руководство по обслуживанию

Результаты поиска

Содержание S-71WF3E

Отзывы:

Бренды по названию

Популярные бренды