Panasonic S-100PF1E5A, Руководство по обслуживанию

Страница: 125 / 693

1-115
1
Single -Type
1-1. Unit Specifi cations
PE1
5. Ducted Type S-140PN1E5A / U-140PE1E5A
INDOOR MODEL S-140PN1E5A
OUTDOOR MODEL U-140PE1E5A
Branch pipe MODEL -
PERFORMANCE TEST CONDITION ISO13253 / EN14511 / EN12102
POWER SUPPLY
ø, Hz 1ø 50Hz 1ø 50Hz
V 220 230 240 220 230 240 Min Max
C
O
O
L
I
N
G
CAPACITY
kW 14.0 14.0 14.0 3.3 15.5
BTU/h 47800 47800 47800 11300 52900
CURRENT A 1.89 1.82 1.74 20.5 20.1 19.5 - -
INPUT POWER
W 250 250 250 4.400k 4.400k 4.400k - -
TOTAL W - 4.650k 4.650k 4.650k 1000 6.200k
ANNUAL CONSUMPTION TOTAL kWh
*
4 - - 2325 - - -
EER/EER CLASS TOTAL(W/W)
*
5/("A"~"G") - - - 3.01 3.01 / B 3.01 3.30 2.50
Erp
*
6
Pdsign kW - - - - - -
SEER (W/W) - - - - - -
Annual consumption kWh - - - - - -
Class - - - - - -
POWER FACTOR % - - - 98 95 94 - -
NOISE INDOOR
(H/M/L)
dB-A 46/44/39 -
Power Level dB 67/65/60 -
NOISE OUTDOOR
(H/L)
dB-A 54/-
Power Level dB 71/-
H
E
A
T
I
N
G
CAPACITY
kW 16.0 16.0 16.0 4.1 18.0
BTU/h 54600 54600 54600 14000 61400
CURRENT A 1.89 1.82 1.74 20.6 20.2 19.6 - -
INPUT POWER
W 250 250 250 4.440k 4.440k 4.440k - -
TOTAL W - 4.690k 4.690k 4.690k 1050 6.100k
COP/COP CLASS TOTAL(W/W)
*
5/("A"~"G") - - - 3.41 3.41 / B 3.41 3.90 2.95
Erp
*
6
Pdsign kW - - - - - -
Tbivalen °C - - - - - -
SCOP (W/W) - - - - - -
Annual consumption kWh - - - - - -
Class - - - - - -
POWER FACTOR % - - - 98 96 94 - -
NOISE INDOOR
(H/M/L)
dB-A 46/44/39 - ⁄ ⁄
Power Level dB 67/65/60 -
NOISE OUTDOOR
(H/L)
dB-A - 55/- ⁄ ⁄
Power Level dB - 71/-
EXTRA LOW TEMP Total CAPACITY(kW)/INPUT POWER(W)/COP -
MAX CURRENT(A)/MAX INPUT POWER(W) 2.59/345 2.53/345 2.47/345 30.0/6.450k 30.0/6650k 30.0/6850k ⁄
STARTING CURRENT(A)/COMP OUTPUT(W) - - - 20.6/3.0k 20.2/3.0k 19.6/3.0k ⁄
NETWORK IMPEDANCE (ΩMAX.) - -
FM OUTPUT (W) 200 90×2 ⁄
MOISTURE REMOVAL VOLUME L/h(Pt/h) 9.0 (18.9) -
External static pressure Pa 50 (MIN10 - MAX80)
I/D AIR
FLOW
COOL m
3
/min (ft
3
/min) 40/37/30 (1413/1307/1059)
HEAT m 3 /min (ft 3 /min) 40/37/30 (1413/1307/1059)
O/D AIR
FLOW
COOL m
3
/min (ft
3
/min) 135 (4767)
HEAT m 3 /min (ft 3 /min) 120 (4238)
REFRIGERANT TYPE, AMOUNT g (oz) R410A 3.40k (119.9) /
P
R
O
D
I
M
HEIGHT : H mm(inch) 250 (9-27/32) 1416 (55-3/4) /
WIDTH : W mm(inch) 1200 (+100) (47-1/4) (+3-15/16) 940 (37-1/32) /
DEPTH : D mm(inch) 650 (25-19/32) 340 (13-13/32) /
P
A
C D
I
M
HEIGHT : H mm 338 1556 /
WIDTH : W mm 1402 1055 /
DEPTH : D mm 761 485 /
MASS
(NET) k g (lb) 41 (91) 98 (216) /
(GROSS) k
g
(lb) 48 (106) 108 (238) /
LAYERS LIMIT (actually) 6 (7) 1 (2)
Operation
Condition
Cool O.D(DBT) 18°C ~ 32°C -15°C ~ 46°C
Heat O.D(DBT) 16°C ~ 30°C -20°C ~ 24°C
P
I
P
I
N
G
PIPE DIAMETER mm (inch) (Liquid)ø9.52(3/8) (Gas)ø15.88(5/8) (Liquid)ø9.52(3/8) (Gas)ø15.88(5/8)
CONNECT METHOD, STD LENGTH m (ft) fl ared type, 5.0(16.4) fl ared type, 5.0(16.4)
PIPE LENGTH RANGE m (ft) 5 ~ 75 (16.4 ~ 246.1) ~ ~
I/D&O/D HEIGHT DIFFERENCE m (ft) 15 (OD located lower) / 30 (OD located higher) (49.2/98.4)
ADD GAS AMOUNT g /m (oz/ft) 50 (0.538)
PIPE LENGTH FOR ADDITIONAL GAS m (ft) 30 (98.4)
*1 : In case it is necessary to indicate the air fl ow volume in (l/s), the value in (m
3
/min.) shall be multiplied by 16.7 and rounded down the decimal point.
*2 : If the EUROVENT Certifi ed models can be operated under the “extra-low” temperature condition, -7°C dry bulb and -8°C wet-bulb temperatures with rated voltage
230 V shall be used.
*3 : Network Impedance shall be applicable for EUROPE and CHINA models.
*4 : The annual consumption is calculated by multiplying the input power at 230 V (400 V) by an average of 500 hours per year in cooling mode.
*5 : EER and COP classification is at 230 V (400 V) only in accordance with EU directive 2002/31/EC.
*6 : SEER and SCOP classification is at 230V(400V) only in accordance with EN-14825. For heating, SCOP indicates the value of only Average heating season,
Other fiche data indicates in an attached sheet.
SM830231-02̲Single̲欧州.indb 115 SM830231-02̲Single̲欧州.indb 115 2014/09/19 13:21:04 2014/09/19 13:21:04