Chapter 7
Appendix — Specifications
ENGLISH - 269
Specifications
The specifications of the projector are as follows.
Power supply
100 V - 120 V / 200 V - 240 V
~
(100 V - 120 V / 200 V - 240 V alternating current), 50 Hz/60 Hz
Power consumption
1 100 W (11.0 A / 7.7 A)
Power consumption (during
standby)
0.3 W
When [STANDBY MODE] is set to [ECO]
4 W
When [STANDBY MODE] is set to [NORMAL]
DLP chip
Size
24.4 mm (0.96") (aspect ratio 16:10)
Display system
DLP chip x 3, DLP projection system
Number of pixels
2 304 000 pixels (1 920 x 1 200 dots)
Lens
Optional
Light source
Laser diode
Light output
16 000 lm
*1*2
When [OPERATING MODE] is set to [NORMAL]
Center to corner zone ratio
*1
90 %
Contrast ratio
*1
20 000:1 (when [DYNAMIC CONTRAST] is set to [3])
Color system
7 standards (NTSC/NTSC4.43/PAL/PAL-N/PAL-M/SECAM/PAL60)
Projected image size
1.78 m (70") to 25.40 m (1 000")
*3
Image aspect ratio
16:10
Projection method
[FRONT/CEILING], [FRONT/FLOOR], [REAR/CEILING], [REAR/FLOOR]
Power cord length
3.0 m (118-1/8")
Outer case
Molded plastic
Outer color
Black
Dimensions
Width
598 mm (23-17/32") (excluding protrusions)
Height
307 mm (12-3/32") (with the feet at shortest position)
270 mm (10-5/8") (excluding the feet and protrusion)
Depth
725 mm (28-17/32") (excluding the protrusion)
Weight
Approx. 49.0 k
]
(108.0 lbs.)
*4
Noise level
*1
42 dB
Laser
Classification
Laser Class
USA and Canada: Class 3R (IEC 60825-1:2007)
Other countries or regions: Class 1 (IEC/EN 60825-1:2014)
Risk Group
Risk Group 3 (IEC 62471-5:2015)
Operating
environment
Operating
environment
temperature
0 °C (32 °F) to 50 °C (122 °F)
*5*6
Operating
environment
humidity
10 % to 80 % (no condensation)
Remote
control
Power supply
DC 3 V (AA/R6/LR6 battery x 2)
Operating range
Within approx. 30 m (98'5") (when operated directly in front of signal receiver)
Weight
150
]
(5.3 ozs.) (including batteries)
Dimensions
Width: 47.5 mm (1-7/8"), Height: 181.5 mm (7-5/32"), Depth: 27.5 mm (1-3/32")
*1
Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118:2020 international standards.
*2 When a projection lens other than ET-D75LE95, ET-D75LE90 is used
*3
When the Zoom Lens (Model No.: ET-D3LET80, ET-D75LE8) is used, the projected image size for the maximum projection distance will be 1.78 m
(70") to 15.24 m (600").
When the Zoom Lens (Model No.: ET-D3LEW200) or the Fixed-focus Lens (Model No.: ET-D3LEU100) is used, the projected image size for the
maximum projection distance will be 5.08 m (200") to 15.24 m (600").
When the Fixed-focus Lens (Model No.: ET-D75LE95, ET-D75LE90) is used, the projected image size for the maximum projection distance will be
3.05 m (120") to 15.24 m (600").
*4
Average value. Weight varies for each product.
*5
The operating environment temperature should be between 0 °C (32 °F) and 45 °C (113 °F) if the projector is used at an altitude between 1 400 m
(4 593') and 4 200 m (13 780') above sea level.
*6
When the [PROJECTOR SETUP] menu
→
[OPERATION SETTING]
→
[OPERATING MODE] is set to [NORMAL] or [ECO], the light output may be
reduced to protect the projector.
f
When using the projector at an altitude lower than 2 700 m (8 858') above sea level: 35 °C (95 °F)
f
When using the projector at an altitude between 2 700 m (8 858') and 4 200 m (13 780') above sea level: 25 °C (77 °F)
Note
f
The model numbers of accessories and optional accessories are subject to change without prior notice.
Содержание PT-RZ16K
Страница 58: ...58 ENGLISH Chapter 3 Basic Operations This chapter describes basic operations to start with ...
Страница 198: ...198 ENGLISH Chapter 5 Operations This chapter describes how to use each function ...
Страница 239: ...ENGLISH 239 Chapter 7 Appendix This chapter describes specifications and after sales service for the projector ...