Panasonic PT-RZ16K, Инструкция по эксплуатации (Функциональное руководство)

Страница: 190 / 277

Chapter 4 Settings — [NETWORK] menu
190 - ENGLISH
[DHCP]
[ON]
Acquires the IP address automatically if a DHCP server exists in the
network where the projector is to be connected.
[OFF]
Set [IP ADDRESS], [SUBNET MASK], and [DEFAULT GATEWAY] if
a DHCP server does not exist in the network where the projector is
to be connected.
[IP ADDRESS] Enter the IP address if a DHCP server is not used.
[SUBNET MASK] Enter the subnet mask if a DHCP server is not used.
[DEFAULT GATEWAY]
Enter the default gateway address if a DHCP server is not used.
4) Press
as
to select [STORE], and press the <ENTER> button.
f
The confirmation screen is displayed.
5) Press
qw
to select [OK], and press the <ENTER> button.
Note
f
When using a DHCP server, confirm that the DHCP server is running.
f
Consult your network administrator regarding the IP address, subnet mask, and default gateway.
f
When [Art-Net SETUP] is set to [ON(2.X.X.X)] or [ON(10.X.X.X)], [WIRED LAN] cannot be selected.
[PROJECTOR NAME]
Change the projector name. Enter the host name if it is required when using a DHCP server, etc.
1) Press
as
to select [PROJECTOR NAME].
2) Press the <ENTER> button.
f
The [PROJECTOR NAME CHANGE] screen is displayed.
3) Press
asqw
to select the text, and press the <ENTER> button to enter the text.
f
Up to 12 characters can be entered.
4) After entering the projector name, press
asqw
to select [OK], and press the <ENTER> button.
f
To cancel, select [CANCEL].
Note
f
The factory default setting of the projector name is “NAMExxxx”. xxxx is the four digit number assigned for each product.
[NETWORK STATUS]
Display the network information of the projector.
1) Press
as
to select [NETWORK STATUS].
2) Press the <ENTER> button.
f
The [NETWORK STATUS] screen is displayed.
[DHCP] Displays the status of use of the DHCP server.
[IP ADDRESS] Displays the [IP ADDRESS].
[SUBNET MASK] Displays the [SUBNET MASK].
[DEFAULT GATEWAY]
Displays the [DEFAULT GATEWAY].
[DNS1] Displays the address of the preferred DNS server.
[DNS2] Displays the address of the alternate DNS server.
[MAC ADDRESS] Displays the [MAC ADDRESS] of wired LAN.
[ADMINISTRATOR ACCOUNT]
Set the user name and password of the administrator account.
[PASSWORD POLICY]
Display a policy about the password of the administrator account.
1) Press
as
to select [ADMINISTRATOR ACCOUNT].