Chapter 4
Settings — [PICTURE] menu
ENGLISH - 97
Note
f
If you press
w
while the adjustment value is [+15], the value will become [0]. If you press
q
while the adjustment value is [0], the value will
become [+15].
[NOISE REDUCTION]
You can reduce noises when the input image is degraded and noise is occurring in the image signal.
1) Press
as
to select [NOISE REDUCTION].
2) Press
qw
or the <ENTER> button.
f
The
[NOISE REDUCTION]
individual adjustment screen is displayed.
3) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[OFF]
No correction.
[1] - [6]
Compensates the noise. The larger the value, the stronger the compensation of the noise.
Attention
f
When this is set for an input signal with less noise, the image may look different from what it originally was. In such a case, set it to [OFF].
[DYNAMIC CONTRAST]
Light adjustment of the light source and signal compensation are performed automatically according to the image
to make the contrast optimum for the image.
1) Press
as
to select [DYNAMIC CONTRAST].
2) Press
qw
or the <ENTER> button.
f
The
[DYNAMIC CONTRAST]
individual adjustment screen is displayed.
3) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[OFF]
Disables the dynamic contrast function.
[1]
Adjusts the light source and compensates signals to a small extent.
[2]
Adjusts the light source and compensates signals to a moderate extent.
[3]
Adjusts the light source and compensates signals to a large extent.
[USER]
Set any desired correction.
Refer to “Performing desired correction” (
x
page 97) for details.
Performing desired correction
1) Press
as
to select [DYNAMIC CONTRAST].
2) Press
qw
or the <ENTER> button.
f
The
[DYNAMIC CONTRAST]
individual adjustment screen is displayed.
3) Press
qw
to select [USER].
4) Press the <ENTER> button.
f
The
[DYNAMIC CONTRAST]
screen is displayed.
5) Press
as
to select the item to set.
f
The items of the detailed settings will switch each time you press
qw
.
f
Press the <ENTER> button when [MULTI PROJECTOR SYNC] is selected.
Setting item
Details
[AUTO CONTRAST]
(Automatic light source
adjustment)
[OFF]
Does not adjust the light source.
[1] - [255]
The higher the value, the stronger the light adjustment of the light
source.
Can be set in increments of 1.
Содержание PT-RZ16K
Страница 58: ...58 ENGLISH Chapter 3 Basic Operations This chapter describes basic operations to start with ...
Страница 198: ...198 ENGLISH Chapter 5 Operations This chapter describes how to use each function ...
Страница 239: ...ENGLISH 239 Chapter 7 Appendix This chapter describes specifications and after sales service for the projector ...