Panasonic PT-RZ16K Скачать руководство пользователя страница 166

Страница: 166 / 277

Chapter 4

Settings — [PROJECTOR SETUP] menu

166 - ENGLISH

[10SEC.] - [5MIN.]

Turns off the light source when there is no input signal for the preset period.

Select [10SEC.], [20SEC.], [30SEC.], [1MIN.], [2MIN.], [3MIN.], or [5MIN.].

Note

The power indicator <ON (G)/STANDBY (R)> will blink slowly in green while the no signal lights-out function is operating and the light source

is turned off.

When [NO SIGNAL LIGHTS-OUT] is set to anything other than [DISABLE], the following are the conditions to turn the light source back on

again from the condition that the light source has turned off by this function.

When the signal is input

When on-screen display such as menu screen (OSD) or input guide, a test pattern, or a warning message is displayed

When the power on <

> button is pressed

When the operation to disable the shutter function (shutter: opened) is performed, such as pressing the <SHUTTER> button

When the operating environment temperature is around 0 °C (32 °F) and the light source is forced to turn on due to warm-up

The no signal lights-out function is disabled in following cases.

When the [DISPLAY OPTION] menu

→

[BACK COLOR] is set to [DEFAULT LOGO] or [USER LOGO], and the Panasonic logo or the

image registered by the user is displayed on the projected image

When the [SECURITY] menu

→

[DISPLAY SETTING] is set to [TEXT] or [USER LOGO], and the security message (text or image)

registered by the user is displayed on the projected image

[INITIAL STARTUP]

Set the startup method when the <MAIN POWER> switch is set to <ON>.

1) Press

to select [INITIAL STARTUP].

2) Press

to switch the item.

The items will switch each time you press the button.

[LAST MEMORY]

Starts up the projector in the condition before the <MAIN POWER> switch is set to <OFF>.

[STANDBY]

Starts up the projector in standby.

[ON]

Starts projecting immediately.

[STARTUP INPUT SELECT]

Set the input when the projector is switched on to start projection.

1) Press

to select [STARTUP INPUT SELECT].

2) Press the <ENTER> button.

The

[STARTUP INPUT SELECT]

screen is displayed.

3) Press

asqw

to select the input, and press the <ENTER> button.

[LAST USED]

Keeps the input selected last.

[RGB1]

Sets the input to RGB1.

[RGB2]

Sets the input to RGB2.

[DVI-D]

Sets the input to DVI-D.

[HDMI]

Sets the input to HDMI.

[DIGITAL LINK]

Sets the input to DIGITAL LINK.

[SDI1]

Sets the input to SDI1.

[SDI2]

Sets the input to SDI2.

[INPUT1] - [INPUT10]

Sets the input to DIGITAL LINK, and switches the input of the Panasonic twisted-pair-cable

transmitter to the specified input.

When the optional DIGITAL LINK output supported device (Model No.: ET-YFB100G, ET-YFB200G) is connected to the projector, its input

name is automatically reflected from [INPUT1] to [INPUT10]. When an item that does not reflect the input name is selected, it will be disabled.

[DATE AND TIME]

Set the time zone, date, and time of the built-in clock of the projector.

Setting the time zone

1) Press

to select [DATE AND TIME].

2) Press the <ENTER> button.

The

[DATE AND TIME]

screen is displayed.

Содержание PT-RZ16K






















































































































































































































































































Результаты поиска

Содержание PT-RZ16K

Отзывы:

Похожие инструкции для PT-RZ16K

Бренды по названию

Популярные бренды

Panasonic PT-RZ16K, Инструкция по эксплуатации (Функциональное руководство)

Результаты поиска

Содержание PT-RZ16K

Отзывы:

Похожие инструкции для PT-RZ16K

Бренды по названию

Популярные бренды