Chapter 5
Operations — Using the data cloning function
ENGLISH - 223
10) Press the <DEFAULT> button on the remote control.
f
The confirmation screen is displayed.
11) Press
qw
to select [OK], and press the <ENTER> button.
f
Copy of the data between the projectors is started.
Once the copy is completed, results are displayed as a list in the
[DATA CLONING]
screen.
Meanings of the marks displayed in the list are as follows.
g
Green: Data copy has succeeded.
g
Red: Data copy has failed. Confirm the connection of the LAN cable and power status of the copy
destination projector.
f
Data is copied to the copy destination projector in the standby mode.
If the copy destination projector is in the projection mode, the data cloning request message is displayed,
and then the copy destination projector automatically shifts to the standby mode to start copy of data.
12) Turn on the copy destination projector.
f
The copied content is reflected to the projector.
Note
f
The security password is the password set in the [SECURITY] menu
→
[SECURITY PASSWORD CHANGE].
Initial password of the factory default setting:
awsqawsq
f
The light source indicators <LIGHT1>/<LIGHT2> and the temperature indicator <TEMP> of the destination projector blink while copying the
data. Confirm the blinking of the indicators stops, and then turn on the power supply.
Setting [WRITE PROTECT]
Set if the copy of data using the data cloning function is permitted or not.
1) Press
as
to select [DATA CLONING] on the copy destination projector.
2) Press the <ENTER> button.
f
The
[SECURITY PASSWORD]
screen is displayed.
3) Enter a security password and press the <ENTER> button.
f
The
[DATA CLONING]
screen is displayed.
4) Press
as
to select [WRITE PROTECT].
5) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[OFF]
Permits operations of the data cloning function from another projector.
[ON]
Does not permit the operations of the data cloning function from another projector.
f
Data copy will not be possible when [ON] is set. When it is not necessary to copy data of another
projector, set to [ON] so that the data is not changed by mistake.
Note
f
The security password is the password set in the [SECURITY] menu
→
[SECURITY PASSWORD CHANGE].
Initial password of the factory default setting:
awsqawsq
Содержание PT-RZ16K
Страница 58: ...58 ENGLISH Chapter 3 Basic Operations This chapter describes basic operations to start with ...
Страница 198: ...198 ENGLISH Chapter 5 Operations This chapter describes how to use each function ...
Страница 239: ...ENGLISH 239 Chapter 7 Appendix This chapter describes specifications and after sales service for the projector ...