Panasonic PT-RZ16K, Инструкция по эксплуатации (Функциональное руководство)

Страница: 149 / 277

Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 149
Note
f
The numeric value information of the zoom position is displayed only in following cases.
g
When the standard DC motor unit installed in the Zoom Lens (Model No.: ET-D75LE6, ET-D75LE8, ET-D75LE10, ET-D75LE20,
ET-D75LE30, ET-D75LE40, etc.) is replaced with the stepping motor unit using the Stepping Motor Kit (Model No.: ET-D75MKS10)
g
When the projection lens with stepping motor is attached
Loading the lens position
1) Press
as
to select [LENS].
2) Press the <ENTER> button.
f
The [LENS] screen is displayed.
3) Press
as
to select [LENS MEMORY].
4) Press the <ENTER> button.
f
The [LENS MEMORY] screen is displayed.
5) Press
as
to select [LENS MEMORY LOAD].
6) Press the <ENTER> button.
f
The [LENS MEMORY LOAD] screen is displayed.
f
The name of the saved lens memory and its lens position information ([VERTICAL POSITION]/
[HORIZONTAL POSITION]/[FOCUS POSITION]/[ZOOM POSITION]) are displayed in the [LENS MEMORY
LOAD] screen.
7) Press
as
to select the item to load, and press the <ENTER> button.
f
The confirmation screen is displayed.
8) Press
qw
to select [OK], and press the <ENTER> button.
f
The lens will automatically move to the lens position (vertical position, horizontal position, focus position,
and zoom position) of the loaded lens memory.
Note
f
Lens memory is not guaranteed to be 100 % reproduced. Readjust the focus, zoom, and lens shift after loading the lens memory if required.
f
If the projection lens is replaced, execute the [PROJECTOR SETUP] menu → [LENS] → [LENS CALIBRATION], readjust the focus, zoom,
and lens shift, and save the lens memory again.
f
The lens memory for the zoom position will not operate when a projection lens without the zoom function is used.
f
The numeric value information of the zoom position is displayed only in following cases.
g
When the standard DC motor unit installed in the Zoom Lens (Model No.: ET-D75LE6, ET-D75LE8, ET-D75LE10, ET-D75LE20,
ET-D75LE30, ET-D75LE40, etc.) is replaced with the stepping motor unit using the Stepping Motor Kit (Model No.: ET-D75MKS10)
g
When the projection lens with stepping motor is attached
f
The saved lens memory is loaded in order every time the <FUNCTION> button is pressed when [LENS MEMORY LOAD] is assigned to the
<FUNCTION> button.
Deleting a lens memory
1) Press
as
to select [LENS].
2) Press the <ENTER> button.
f
The [LENS] screen is displayed.
3) Press
as
to select [LENS MEMORY].
4) Press the <ENTER> button.
f
The
[LENS MEMORY]
screen is displayed.
5) Press
as
to select [LENS MEMORY EDIT].
6) Press the <ENTER> button.
f
The [LENS MEMORY EDIT] screen is displayed.
7) Press
as
to select [LENS MEMORY DELETE].
8) Press the <ENTER> button.
f
The [LENS MEMORY DELETE] screen is displayed.