Chapter 4
Settings — [NETWORK] menu
ENGLISH - 193
f
The user name and password of the administrator account can also be changed in “[Set up password] page (when accessed by
administrator account)” (
x
page 217) of the web control screen.
f
The user name and password of the standard user account without administrator rights can be set in “[Set up password] page (when
accessed by administrator account)” (
x
page 217) of the web control screen.
[NETWORK SECURITY]
Perform the setting to protect the projector from an external attack or abuse via LAN.
[COMMAND PROTECT]
Perform the setting regarding connection authentication when using the command control function.
1) Press
as
to select [NETWORK SECURITY].
2) Press the <ENTER> button.
f
The
[NETWORK SECURITY]
screen is displayed.
3) Press
qw
to switch the [COMMAND PROTECT] setting.
[ENABLE]
Connects to the projector in protect mode.
Connection authentication is performed using the user name and password of the administrator
account.
[DISABLE]
Connects to the projector in non-protect mode.
Connection authentication is not performed.
f
The confirmation screen is displayed when the setting is switched.
4) Press
qw
to select [OK], and press the <ENTER> button.
f
The
[COMMAND PROTECT]
screen is displayed.
5) Press
asqw
to select [USER NAME], and press the <ENTER> button.
f
The
[USER NAME]
screen is displayed.
6) Press
asqw
to select the text, and press the <ENTER> button to enter the text.
f
Enter the user name of the administrator account.
7) After the user name is entered, press
asqw
to select [OK], and press the <ENTER> button.
f
The
[COMMAND PROTECT]
screen is displayed.
8) Press
as
to select [PASSWORD], and press the <ENTER> button.
f
The
[PASSWORD]
screen is displayed.
9) Press
asqw
to select the text, and press the <ENTER> button to enter the text.
f
Enter the password of the administrator account.
10) After the password is entered, press
asqw
to select [OK], and press the <ENTER> button.
f
The
[COMMAND PROTECT]
screen is displayed.
11) Press
asqw
to select [OK], and press the <ENTER> button.
Note
f
When [COMMAND PROTECT] is set to [DISABLE], the projector becomes vulnerable against a threat on the network because connection
authentication will not be performed. Use this function by understanding the risk.
f
When a password is not set for the administrator account (when blank), [COMMAND PROTECT] cannot be set.
f
For details on how to use the command control function, refer to “Control commands via LAN” (
x
page 247).
[NETWORK CONTROL]
Set the controls of the projector via the network.
f
To use the network function with the projector, it is necessary to set the password of the administrator account.
(
x
page 192)
1) Press
as
to select [NETWORK CONTROL].
2) Press the <ENTER> button.
f
The
[NETWORK CONTROL]
screen is displayed.
3) Press
as
to select an item, and press
qw
to change the setting.
Содержание PT-RZ16K
Страница 58: ...58 ENGLISH Chapter 3 Basic Operations This chapter describes basic operations to start with ...
Страница 198: ...198 ENGLISH Chapter 5 Operations This chapter describes how to use each function ...
Страница 239: ...ENGLISH 239 Chapter 7 Appendix This chapter describes specifications and after sales service for the projector ...