background image

Rev. 03072019JA 

www.epvscreens.com

 

 

 

 

Polar Max Recessed Series 

Recessed In-ceiling Ambient Light 

Rejecting

 

Projector Screen

 

 

 

 

Installation Guide 

Important Safety & Warning Precautions 

Make sure to read this user’s guide and follow the procedures below. 

 

Caution: 

The screen’s Black Top Drop is already set to its maximum drop distance. There is NO extra Black 

Top Drop in the roller. Unapproved changes or modifications (except for cutting the power cord for hardwire 
installations) to this unit are prohibited and will void your warranty. For more information, please contact our 
Technical Support Department at (877) 511-1211 Ext. 604. 
 

 

Please retain this user’s guide for future reference. 

 

To avoid damaging the unit, do not use with any unauthorized accessories not recommended by the 

manufacturer. 

 

Handle the unit carefully during transportation to avoid any damages. 

 

To  ensure  safe  and  reliable  operation,  direct  connection  to  a  properly  grounded  power  source  is 

advised. 

 

The power outlet supplying power to the unit should be close to the unit and easily accessible. 

 

Do not install the unit on uneven, inclined surfaces;  

 

Do not install in damp places to avoid an electric shock or short circuit. 

 

Do not place any heavy objects over the power cord. 

 

Position the power cord properly to avoid creating a trip obstacle. 

 

To avoid an electrical shock or fire, due to a loose contact or short circuit, do not overload the power 

cord. 

 

The internal & external parts of this unit are not end user serviceable. Do not attempt to disassemble 

this unit by yourself. No one except authorized technicians can open and make repairs to this unit. 

 

Make sure the power source that this unit is connected to has a continuous power flow. 

 

If there is need to use an extension cord, make sure the cord has an equal rating as the appliance to 

avoid over heat. 

 

Do not handle the power plug when your hands are wet or your feet are in contact with water. 

 

Properly dispose of this equipment according to the environmental regulations in your area when 

product is no longer of service. 

 

Do not use this unit under the following circumstances. 

 

Disconnect the power cord under the conditions of heavy rain, wind thunder or lightning.

 

 

Avoid direct sun light, rain shower and moisture.

 

 

Keep away from fire sources and high temperature to prevent this device from overheating. 

 

 

Cut off the power supply first before transportation or maintenance.

 

 

To avoid possible injury and/or an electric shock, do not attempt to use this screen if there is obvious 
damage or if there are any evident broken parts.

 

 

Содержание Polar Max Recessed Series









Отзывы: