Panasonic FP-XH Series Скачать руководство пользователя страница 44

Страница: 44 / 194

Select

File

Save changes and exit

from the menu bar.

A confirmation message box appears.

Press [Yes].
The set information will be saved as part of project files.

4.2.5 Export and Import

● Basic parameters and positioning parameters set can be exported to and imported from the

Configurator PMX.

● Information on positioning parameters and positioning tables saved by using the export

function can be reused between projects.

Select

File

Export

from the menu bar.

The saving destination and file names appear.

Enter a saving destination and file name, and press [Save] button.
Information on the parameters and positioning data tables will be saved in a file with a

“.pmx” extension.

● When export is executed, information on the positioning data tables will be saved along

with parameters set in the parameter setting menu.

4.2.6 Check on Parameter Data

● The following procedure is explained on the condition that the Configurator PMX has already

started.

4.2 Settings in Configurator PMX

4-14

WUME-FPXHPOSG-01

Содержание FP-XH Series



































































































































































































Результаты поиска

Содержание FP-XH Series

Отзывы:

Похожие инструкции для FP-XH Series

Бренды по названию

Популярные бренды

Panasonic FP-XH Series, Руководство пользователя

Результаты поиска

Содержание FP-XH Series

Отзывы:

Похожие инструкции для FP-XH Series

Бренды по названию

Популярные бренды