3-22
1
1)
Removal of the cleaning blade
1) Open the front door.
2) Move the toner hopper to front side.
3) Rotate the developer release lever
clockwise and remove the developer unit.
1) Remove the drum unit solenoid cover
(1 screw).
2) Disconnect the harness.
3) Remove the drum fixing screw.
4) Open the waste toner bottle cover and
remove the bottle.
5) Remove the drum unit.
1) Press the tabs of the drum unit lid toward
arrow mark to remove the lid.
1) Remove the cleaning blade tension
spring.
2) Remove the blade case (1 screw).
3) Remove the cleaning blade.
Note: • Before replacing the cleaning blade,
put drum starting powder on the
drum surface and cleaning blade.
(lightly and evenly)
• After replacing the cleaning blade, do
not forget to reinstall the tension
spring.
4
3
2
3
2
1
1
2
4
1
5
3
1
2
Содержание FP-D250
Страница 198: ...4 77 PCB Connector and Signal Information 2 Control Panel PCB A FP D250 D350 Series CN354 CN355 Not used...
Страница 332: ...4 211 PCB Connector and Signal Information 2 Control Panel PCB A FP D450 D600 Series CN354 CN355 Not used...
Страница 517: ...5 79 Troubleshooting Code Item Function Factory setting US38 User information list 0 Stop 0 1 Start...