Panasonic CF-T8 series Скачать руководство пользователя страница 65

Страница: 65 / 133

Modem

<Only for model with internal modem>

CAUTION

You cannot connect the modem to the following lines.
• Interphone
• Intercoms
• ISDN

Be sure to connect the telephone cable into the modem port, not into the LAN port.

Use a surge protector since the modem may be damaged by a sudden high voltage surge that may occur in the event
of a lightning strike.

Connect the computer and the telephone jack (A) using the
telephone cable (B).

Hold the cable so that the shape of the connector (C) matches the port, and
insert fully until it clicks.

Click (Start) - [Control Panel] - [Connect to the Internet] -
[Dial-up] and change the settings as necessary.

Click [start] - [Control Panel] - [Printers and Other Hardware] -
[Phone and Modem Options] and change the settings as nec-
essary.

NOTE

Do not enter

sleep/

standby or hibernation during communications.

To remove the cable, press and hold the lever and pull out.

Connecting the Internal Modem with a Telephone Jack

Windows 7

Windows XP

Windows 7

Windows XP

Содержание CF-T8 series






































































































































Результаты поиска

Содержание CF-T8 series

Отзывы:

Похожие инструкции для CF-T8 series

Бренды по названию

Популярные бренды

Panasonic CF-T8 series, Справочное руководство

Результаты поиска

Содержание CF-T8 series

Отзывы:

Похожие инструкции для CF-T8 series

Бренды по названию

Популярные бренды