Scan Tool User Guide
73
Special Test Screen Examples
15: Special Tests (Actuator Tests)
Basic Multiple Component Control Screen
The following screen is the basic manual control
screen for multiple components. This screen allows
control of more than one component and has a More
function key menu for performing additional func-
tions. You select a component and then press the
Start function key to begin. You then use the On and
Off function keys to control the selected component.
Figure 15.4: Multiple Component Control Screen Example
Item 1
This area displays the command you have issued
through the scan tool (On, Off).
Item 2
This area displays the list of components you can control
along with the state of each component being read by the
ECU.
Item 3
The status line displays the current status of the test.
Item 4
The function keys let you manually control the
component as necessary. Compare what is commanded
by the scan tool to the state of the component being read
by the ECU to the actual physical state of the component.
Item 5
The More menu contains basic Datastream functions.
For details, refer to
Datastream Functions
on
page 40
.
Solenoid, Relay Controls Screen
The following screen is the basic manual control
screen for a solenoid and enable relay. You press the
Start function key to begin (when you press Start, the
key name changes to Exit). You then use the Sole-
noid and Relay function keys to control the compo-
nents.
Figure 15.5: Solenoid, Relay Controls Screen Example
Item 1
This area displays the commands you have issued
through the scan tool (On, Off).
Item 2
This area displays the states of the components being
read by the ECU. The bottom of this area may also
contain special test instructions.
Item 3
The status line displays the current status of the test.
Item 4
The function keys let you manually control the compo-
nent as necessary. Compare what is commanded by the
scan tool to the state of the component being read by the
ECU to the actual physical state of the component.
1
2
4
5
3
1
2
3
4
Содержание Genisys EVO
