Scan Tool User Guide
21
4: Quick DTC Scan (Supported Systems)
The Quick DTC Scan for Supported Systems
function does a quick check for diagnostic trouble
codes (DTCs) in the ECU being tested (primary
system) and any other ECUs that can be read
(OBD-II and other secondary systems), and then
displays a report of any DTCs found.
From the report, you can view live data and detailed
test results, such as DTC descriptions and related
repair information.
The Quick DTC Scan function links with other scan
tool applications, such as Pathfinder, Repair-Trac,
InfoTech, and Fast Fixes (see
Software
Descriptions
on
page 7
.
Basic Test Procedure
To use the Quick DTC Scan for Supported
Systems function, follow these steps:
1
Follow the instructions in
Test Startup and Vehicle
Connection
on
page 16
to display the Diagnostic
Menu screen.
Figure 4.1: Diagnostic Menu Screen
2
Select
Quick DTC Scan for Supported Systems,
press the
ENTER
key, and wait for the results to
appear on the Quick DTC Scan Report screen.
Figure 4.2: Quick DTC Scan Report Screen
NOTE:
For more information about DTCs, refer to
Diagnostic Trouble Codes
on
page 27
.
3
Notice the following about the Quick DTC Scan
Report screen:
•
You use the
Up
and
Down Direction
keys to
scroll through the data and to select lines (one
line at a time).
•
You use the
Right
and
Left Direction
keys to
scroll one screen at a time.
•
The primary system results are listed first
with individual lines for each DTC.
•
The OBD-II results are listed next with
individual lines for each DTC.
•
The secondary systems are listed next, in
separate sections, with individual lines for
each DTC.
•
If additional information is available for a
selected DTC line, the
status bar
at the bottom
of the screen
displays the message
Press
ENTER to view DTC related information
.
Refer to the next section (
DTC Related Repair
Information
on
page 22
) for information about
viewing the DTC information.
•
You can press the
Save
function key at the
bottom of the screen to save the test results for
later viewing with the Playback function.
(Refer to
Playback
on
page 75
.)
•
You can press the
function key to print the
test results. (Refer to
Printing
on
page 83
.)
•
Pressing the
EXIT
key exits the test.
Содержание Genisys EVO
