OTC Genisys EVO, Руководство пользователя

Страница: 32 / 92

26 Scan Tool User Guide
System Test Details
5: Automated System Test
TM
Non-Continuous Tests (Mode 6)
When you select (highlight) the line for a failed Non-
Continuous test (
Figure 5.3 on page 24 ), if you can view
the component test details, the status bar displays the
message
Press ENTER to view component details .
To view Non-Continuous test details, follow
these steps:
1 Follow the steps in the Basic Test Procedure on
page 23 to display the System Test Details screen.
Figure 5.9: System Test Details Screen, Non-Continuous Tests
2 Select the line for a failed component test.
3 If the status bar indicates viewing of component
details is available, press the ENTER key.
Figure 5.10: Component Tests Screen
4 Optionally, use the Refresh function key to display
new data for the component and then press the
ENTER key to return to the Component Tests screen.
5 View the data and optionally use the Print function
key to print it.
6 When finished, use the EXIT key to return to previous
screens.
Oxygen Sensor Tests (Mode 5)
The System Test Details screen ( Figure 5.3 on page
24 ) may include oxygen sensor test results.
Figure 5.11: System Test Details Screen, Oxygen Sensor Tests
Readiness Status
The System Test Details screen ( Figure 5.3 on page
24 ) may include readiness test results.
Figure 5.12: System Test Details Screen, Readiness Tests