OTC Genisys EVO, Руководство пользователя

Страница: 21 / 92

Scan Tool User Guide 15
3: Scan Diagnostics Applications
Overview
When you select Scan Diagnostics from the Applica-
tion Manager screen (
Figure 3.4 on page 16 ), the
Scan Diagnostics screen appears, as shown in the
examples below.
Figure 3.1: Scan Diagnostics Screen - Graphic User Interface
Figure 3.2: Scan Diagnostics Screen - Classic User Interface
This screen contains options for using the Scan
Diagnostics software applications.
• This chapter provides test startup steps for the
Domestic , Asian, ABS/Air Bag, Global OBD II,
Heavy Duty Standard , Latin America , and
European applications. (These applications all
operate the same, but each application covers
different groups of vehicles, such as US, Asian,
ABS, etc.)
• To use the GM SPS Reprogramming application,
refer to the separate manual provided with the
GM SPS Reprogramming application.
To perform scan diagnostic tests, you select an
application from the Scan Diagnostics screen,
enter vehicle information into the scan tool, connect
a communication cable between the scan tool and
the vehicle’s data link connector (DLC), and then
select a diagnostic function / test from the scan tool’s
Diagnostic Menu screen.
Figure 3.3: Diagnostic Menu Screen Example
The diagnostic functions may include any of the
following (these vary by vehicle):
• Quick DTC Scan for Supported Systems
• Automated System Test
TM
• Diagnostic Trouble Codes
• Datastream
• Custom Datastream
• Integrated Diagnostics Scan / Gas
• Pathfinder Troubleshooting
• Vehicle Information
• PROM ID
• Diagnostic States (GM)
• Post Collision Tests (Air Bag)
• Special Tests (actuator and bi-directional tests)
• Playback Recorded Files
• Readiness Status
• Non-Continuous Tests
For short descriptions of the diagnostic functions,
see
Step 4: Select the Diagnostic Function on
page 20 .