Scan Tool User Guide
23
5: Automated System Test
TM
The Automated System Test™ does an automatic
test of the ECU being tested (primary system) and
any other ECUs (secondary systems) that can be
read, does an OBD-II test (if OBD-II), and then
displays a summary of the test results.
From the summary, you can view live data and
detailed test results, such as DTC descriptions and
related repair information, datastream snapshots,
freeze frame data, component test failure informa-
tion, oxygen sensor test results and system readi-
ness test results.
The Automated System Test includes functions from
other scan tool applications, such as Pathfinder,
Repair-Trac, InfoTech, and Fast Fixes (see
Software Descriptions
on
page 7
.
Basic Test Procedure
To use the Automated System Test™, follow
these steps:
1
Follow the instructions in
Test Startup and Vehicle
Connection
on
page 16
to display the Diagnostic
Menu screen.
Figure 5.1: Diagnostic Menu Screen
2
Select
Automated System Test™,
press the
ENTER
key, and wait for the summary test results to appear
on the System Analysis Test Report screen.
Figure 5.2: System Analysis Test Report Screen
3
Notice the following about the System Analysis Test
Report screen:
•
You use the
Up
and
Down
Direction
keys
to scroll through the data and to select lines
(one line at a time).
•
You use the
Right
and
Left
Direction
keys to
scroll one screen at a time.
•
The top line displays the vehicle VIN number
(if available).
•
The second line displays the calibration
identification number for the primary system
(if available).
NOTE:
The primary system is the vehicle ECU
selected during the vehicle setup.
•
The third line displays the name of the primary
system along with count numbers for the
various system tests.
•
The remaining lines display the names and
counts for Global OBD-II and/or any secondary
system tests.
NOTE:
The secondary systems are all other
ECUs that can be read through the cable
connection (or with the SSI if used).
•
You can press the
Save
function key at the
bottom of the screen to save the test results for
later viewing with the Playback function.
(Refer to
Playback
on
page 75
.)
•
You can press the
function key to print the
test results. (Refer to
Printing
on
page 83
.)
•
You can use the
Detail
function key to view test
details. Go to step 4 on page
page 24
.
•
Pressing the
EXIT
key exits the test.
Содержание Genisys EVO
