OTC Genisys EVO, Руководство пользователя

Страница: 48 / 92

42 Scan Tool User Guide
Datastream Functions
7: Datastream
Graph / Analog / LED / Digital
The Graph/ Analog / LED / Digital function lets you
change the display type for each line on the
Datastream screen. Depending on the type of data
on a line, you can change a selected line from digital
to a graphical or LED display. You can also set some
of the lines to display analog meters (gauges) at the
top of the screen.
To change the display for each line, follow these
steps:
Figure 7.4: Datastream Screen - Digital Display
1 With the Datastream screen displayed, use the Up or
Down Direction key to select the line to change.
2 Press the Graph / Analog / LED / Digital function
key.
NOTE: This name of this function key changes
each time you press the key. The name of the key
represents the next display type that will appear
when you press the key.
3 Repeat steps 1 and 2 for each line to change.
About Digital Display
When a line is displayed as Digital, its reading is a
word or a number as shown for all the lines in
Figure
7.4 .
You can change the display of the lines as follows:
• If the selected line’s data reading is a word (usually a
switch reading), such as On, Off, Open, Closed, etc.,
then you can change the line’s display back and forth
between LED and Digital.
• If the selected line’s data reading is a number (usually
a sensor reading), such as 1.1 V, 23.3 Amps, etc.,
then you can change the line to also display as either
a graph or an analog gauge.
About LED Display
If a selected line’s data reading is a word (usually a
switch reading such as On, Off, Open), you can use
the LED function key to change the line to display as
an LED bar. For example, see
Figure 7.4 and Figure
7.5 . Notice how the function key changes to toggle
back and forth between LED and Digital.
Figure 7.5: Datastream Screen - LED Display Function