Ossila Slot-Die Coater
User Manual
Ossila.com
26
Ossila Limited © 2019
9.2.5
Assembly and installation of the Slot-Die Head
The slot-die head can be assembled and installed while the unit is powered down.
1.
Make sure that the stainless-steel
heads and are free of dirt or dust
before assembling, or there may
be defects within the coating. The
head should be disassembled and
cleaned after each use.
2.
Select a shim with appropriate
width for the substrate you wish to
coat. Add the required number of
shims to get the gap thickness
required. Each shim is 100
μ
m
thick.
3.
Clamp the shims between the two
halves of the slot-die head and
using the four shorter corner
screws to clamp the slot-die head
together. The screws should go
through the half of the head with
the socket for the Luer lock
adapter first.
