Ossila Slot-Die Coater
User Manual
Ossila.com
12
Ossila Limited © 2019
6.2
Hazard Icons
The following symbols can be found at points throughout the rest of the manual. Note and read each
warning before attempting any associated operations associated with it:
Symbol
Associated Hazard
General warning or caution, explained within the accompanying text
Electrical shock
Pinch point, or entanglement hazard
Hot surface
Table 6.1
Hazard warning labels used in this manual.
6.3
General Hazards
When installing or operating the Slot-Die Coater, there are several health and safety precautions
that must be considered.
WARNING: Improper handling when operating or servicing this equipment can result in serious
injury. Pay attention to the following hazards when operating this equipment.
Pinch point and entanglement hazards are present during operation of the syringe
pump and stage. As a precaution, users should avoid handling or leaning over the
equipment during operation to avoid possible crushing or entanglement of hair and/or
clothing. The unit
weighs approximately 10 kg. Care should be taken when handling or
moving the unit
In the event of an emergency, the unit can be disabled by disconnecting the power cord
from the power supply. Make sure that the power outlet for this cord is readily accessible
to the operator.
Servicing should only be performed by an Ossila engineer. Any modification or alteration
may
damage the equipment, cause injury, or death. It will also void your equipment’s
warranty.
