Ossila Slot-Die Coater
User Manual
Ossila.com
25
Ossila Limited © 2019
7.
To change the
Dispense Rate
for the
current step, navigate to the ‘Dispense
rate’ line and press
to edit.
8.
If the dispense rate is set above the
maximum allowed rate of the syringe, a
warning will appear on the screen. Press
to continue, and the system will
autocorrect the rate to the maximum
allowed rate value for the selected syringe
size. (To see the minimum and maximum
rates for each syringe, refer to
Section
12.1
)
9.
To include the delay in the current step,
navigate to the
Stage delay
and press
to enter edit mode. The digit cursor will
appear under the number. Users can
navigate between the digits by pressing
and
buttons. To change the value of
the selected digit, press
and
buttons. Press
again to exit the edit
mode.
Note: The stage delay is used to delay the
coating at the beginning of the step but
allow the syringe to still dispense at the set
rate.
