Ossila Slot-Die Coater
User Manual
Ossila.com
21
Ossila Limited © 2019
7.
The stage position is tracked across the
slot-die coater operation. The user allows
to set new HOME position for the system
during current operation. To set the new
stage home position, navigate to
the ‘
Stage
Home
’
line and press
to edit. Press
to set the new Home position based on the
stage
’s
current position. Press
again to
exit the edit mode.
Note: To change the stage position
manually, go to
Manual Mode
.
9.2.3
Manual Mode
Manual Mode
allows direct control over the syringe pump and stage positions. Entering edit mode
on any parameter will turn the text of the parameter red.
WARNING: Pinch points and entanglement
The rotation of the lead screw/coupling and the movement of the plunger pusher
present entanglement and pinch hazards. Care should be taken when the system is
running.
1.
To enter
Manual Mode
, press
located
at the top left-hand side of the screen. The
stage is pre-selected in
Manual Mode
.
Press
to select Stage (if not already
selected).
2.
The stage has pre-set speed values of
0.062 mm/s, 0.250 mm/s, 0.625 mm/s and
1.250 mm/s.
To change the speed, press
to choose the desired speed for
Manual Mode
.
