Ossila Slot-Die Coater
User Manual
Ossila.com
24
Ossila Limited © 2019
4.
To change individual step parameter
values, navigate to the ‘Step’ line. Press
to enter edit mode and press
or
to change the value. Press
again
to exit edit mode. You can press
and
to change which step number is
selected when not in edit mode.
5.
The coating length, coating speed and
dispense rate can be set for each step. To
edit the coating length, navigate to the
‘Coating length’ line and press
to edit.
The digit cursor will appear under the
number.
Note: If the coating length is set above the
maximum length allowed (100 mm), a
warning will appear to notify the user. The
system will automatically calculate the
remaining allowed length and set it in the
current step.
6.
To change the
Coating Speed
for the
current step, navigate to the ‘Coating
speed’ line and press
to edit. The
maximum coating speed allow is
50 mm/s
.
Coating speeds will round to the nearest
value that the stepper motor can achieve.
