Guidance
▌
42
High-speed return-to-home operation (ZHOME operation)
High-speed return-to-home operation is used to return to the home position that is set by the
MEXE02
or HOME
PRESET switch.
1. Turn on the power supply.
The READY output and PLS-RDY output turn ON.
2. Check the READY output has been turned ON and turn the ZHOME input ON.
The READY output will turn OFF, and the motor will start high-speed return-to-home operation.
3. Check the READY output has been turned OFF and turn the ZHOME input OFF.
When the home position is detected, the operation will be stopped.
The HOME-END output and READY output will turn ON.
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
Motor operation
Power supply
ZHOME input
HOME-END output
PLS-RDY output
ON
OFF
MOVE output
READY output
1
2
2
3
3
JOG operation
Constant speed operation can be performed with JOG operation. The motor operates continuously while the FW-JOG
input or RV-JOG input is being ON.
1. Turn on the power supply.
The READY output and PLS-RDY output turn ON.
2. Check the READY output has been turned ON and turn the FW-JOG input or RV-JOG input ON.
The motor will start operation.
When the FW-JOG input is turned ON, the motor rotates in the forward direction, and when the RV-JOG input is
turned ON, the motor rotates in the reverse direction.
3. Turn the input signal OFF.
The motor will decelerate to a stop. When the motor stops, the READY output will turn ON.
ON
OFF
ON
OFF
ON
OFF
ON
OFF
FW-JOG input or
RV-JOG input
PLS-RDY output
ON
OFF
MOVE output
READY output
ON
OFF
IN-POS output
Motor operation
Power supply
1
2
2
3
