Installation
13
▐
Removing from DIN rail
Pull the DIN lever down until it locks using a fl at tip screwdriver, and lift the
bottom of the driver to remove it from the rail.
Use force of about 10 to 20 N (2.2 to 4.5 lb.) to pull the DIN lever to lock it.
Excessive force may damage the DIN lever.
Dimension [unit: mm (in.)]
The dimension is common to all drivers.
Mass: 0.15 kg (0.33 lb)
Built-in controller type, Pulse input type with RS-485 communication interface
[90 (3.54)]
4 (0.16)
100 (3.94)
35.1
(1.38)
17.5 (0.69)
70 (2.76)
19.5 (0.77)
4.7 (0.19)
[41 (1.61)]
9.2 (0.36)
35 (1.38)
Slit
Pulse input type
[90 (3.54)]
35 (1.38)
4 (0.16)
100 (3.94)
35.1
(1.38)
17.5 (0.69)
4.7 (0.19)
70 (2.76)
19. 5 (0.77)
9.2 (0.36)
Slit
