Oracle Sun Server X4-4, Руководство по обслуживанию

Страница: 90 / 292

Prepare the Server for Cold Service
90 Sun Server X4-4 Service Manual • October 2015
■
For troubleshooting information, see “Troubleshooting and Diagnostics” .
1. Log in to the service processor Oracle ILOM web interface.
To log in, open a web browser and direct it using the IP address of the server SP. Log in as root
or a user with administrator privileges. For more information, see Oracle X4 Series Servers
Administration Guide
.
The Summary screen appears.
2. In the Actions section of the Summary screen, click the Locator Indicator Turn
On button.
This action activates the Locator indicator on the server front panel. For more Locator indicator
management options, see “Managing the Locator Indicator” on page 104 .
3. Once at the service location, press the Locator indicator button to deactivate
the indicator. For more information, see “Manage the Locator Indicator
Locally” on page 106 .
4. Set up an ESD-safe space at the service location.
Set up a space where you can set components. The space needs to be ESD safe. See
“Performing Electrostatic Discharge and Static Prevention Measures” on page 74 .
Next Steps ■
“Servicing Storage Drives (CRU)” on page 109
-or-
■
“Servicing Fan Modules (CRU)” on page 114
-or-
■
“Servicing Power Supplies (CRU)” on page 122
Prepare the Server for Cold Service
Note -
This procedure uses a combination of the Oracle ILOM web and CLI interfaces.
However, the procedure can also be performed using only the Oracle ILOM CLI interface.
For more information about the Oracle ILOM CLI interface, refer to the Oracle ILOM
documentation.
A cold-service component must be serviced when the server is completely powered off. For
more information about component serviceability, see “Component Serviceability” on page 66 .
This procedure describes how to prepare the server for service, so you can:
■
Remove, replace, or install cold-serviceable components
■
Remove, replace, or install internal components