Oracle Sun Server X4-4, Руководство по обслуживанию

Страница: 230 / 292

(Optional) Install the Server Into the Rack
230 Sun Server X4-4 Service Manual • October 2015
(Optional) Install the Server Into the Rack
Before You Begin
Caution -
Physical or component damage. The server is heavy and cannot be safely installed in
the rack by a single person. Use multiple personnel and a mechanical lift to install the server in
the rack.
When preparing the server for operation, use these optional steps to install the server in the
rack.
1. Push the slide-rails into the slide-rail assemblies into the rack as far as possible.
2. Raise the server so that the ends of the mounting brackets are aligned with the
slide-rail assemblies that are mounted in the rack.
3. Ensure that both the top and bottom mounting lips of the mounting brackets are
aligned with the slide-rails.
Caution -
Physical or component damage. The server might fall if the mounting brackets are
not inserted properly into the slide rails. Ensure that the mounting lips are properly aligned and
the insert the brackets into the slide rails properly.
4. Insert the mounting brackets into the slide-rails and push the server into the
rack until the mounting brackets encounter the slide-rail stops (approximately
12 inches, or 30 cm) and the server rails lock the server into the maintenance
position.