manualshive.com logo in svg

Oracle Sun Server X4-4, Руководство по обслуживанию

Поделиться
Скачать
Oracle Sun Server X4-4 Скачать руководство пользователя страница 169

Remove a CPU Cover Plate (FRU)

Servicing FRU Components

169

Cover plates are plastic inserts that attach to the CPU load plate and protect the pins of an

unoccupied CPU socket. Cover plates are used in a two-CPU server (for the unoccupied

sockets) and on replacement motherboards. When replacing a motherboard, remove the covers

and installed them on the failed board.

Before You Begin

■

For serviceability considerations, see 

“Component Serviceability” on page 66

.

■

For fan module designation information, see 

“Component Designations” on page 69

.

1.

Prepare the server for service. See 

“Prepare the Server for Cold

Service” on page 90

.

2.

Disengage the CPU load plate release levers by pushing them down and moving

them slightly toward the CPU socket and away from their retaining clips.

The levers are numbered with their required order of operation. The left-side lever (when

viewed from the front of the server) must be operated first.

Содержание Sun Server X4-4





































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды