Oracle Sun Server X4-4, Руководство по обслуживанию

Страница: 86 / 292

Clear Hardware Fault Messages
86 Sun Server X4-4 Service Manual • October 2015
in to the Oracle ILOM CLI. For events logged in the Oracle ILOM event log, use the Oracle
ILOM web interface.
For information about using fmadm, refer to the Oracle ILOM User Guide at
http://www.
oracle.com/goto/ILOM/docs
Before You Begin ■
This procedure requires the use of the Oracle ILOM CLI interface.
1.
Open an SSH session and at the command line log in to the SP Oracle ILOM CLI.
Log in as a user with root or administrator privileges. For example:
ssh root@
ipadress
where ipadress is the IP address of the server SP.
For more information, see “Accessing Oracle ILOM” in Oracle X4 Series Servers
Administration Guide .
The Oracle ILOM CLI prompt appears:
->
2.
To access fmadm, type:
start /SP|CMM/faultmgmt/shell
The fmadm prompt appears:
faultmgmtsp>
3.
To get a listing of command options for displaying or clearing a fault with
fmadm, type :
help fmadm
The following output appears:
where <subcommand> is one of the following:
faulty [-asv] [-u <uuid>] : display list of faulty resources
faulty -f [-a] : display faulty FRUs
faulty -r [-a] : display faulty FRUs (summary)
acquit <FRU> : acquit faults on a FRU
acquit <UUID> : acquit faults associated with UUID
acquit <FRU> <UUID> : acquit faults specified by (FRU, UUID) combination
replaced <FRU> : replaced faults on a FRU
repaired <FRU> : repaired faults on a FRU
repair <FRU> : repair faults on a FRU