Oracle Sun Server X4-4 Скачать руководство пользователя

Страница: 179 / 292

Remove a Heatsink and CPU (FRU)

Servicing FRU Components

179

Press down on the release button on top of the replacement tool.

This action opens the tool.
On one corner of the tool there is a label with a downward pointing triangle. Likewise,

the CPU is marked with a triangle on one of its corners. This is a key that aids in correctly

positioning the tool and the CPU with the CPU socket. The tool and the CPU are correctly

positioned with the socket when all of the triangles are aligned.

Orient the bottom of the tool over the CPU, ensuring that the triangle on the

tool aligns with the triangle on the CPU.

Lower the tool onto the CPU, ensuring that it sits evenly on the CPU.

Push the release tab away from the center button.

This action is accompanied by a click sound as the tool closes and grabs the CPU.

Содержание Sun Server X4-4





































































































































































































































































































Результаты поиска

Содержание Sun Server X4-4

Отзывы:

Похожие инструкции для Sun Server X4-4

Бренды по названию

Популярные бренды

Oracle Sun Server X4-4, Руководство по обслуживанию

Результаты поиска

Содержание Sun Server X4-4

Отзывы:

Похожие инструкции для Sun Server X4-4

Бренды по названию

Популярные бренды