Oracle netra X5-2, Руководство по обслуживанию

Страница: 51 / 274

Troubleshooting (Oracle ILOM Legacy Targets)
■
“Resettable Targets” on page 51
Resettable Targets
This table lists Oracle ILOM targets that are resettable through their
clear_fault_action
property and the related components with manual reset capability. This table is the
reverse of that found in “Oracle ILOM Legacy Targets for Component FRUID and Fault
States” on page 53 and is used for the task “Clear a Fault Manually” on page 50 .
Target Component
/SYS
Server as a whole
/SYS/MB
Motherboard
/SYS/MB/NET
x Network interface x at the NET x port, where x is
0
to
3
/SYS/MB/P
x Processor x , where x is either
0
or
1
/SYS/MB/P
x
/D
y DIMM y of CPU x , where y is
0
to
11
and x is either
0
or
1
/SYS/MB/FM
x Fan module x , where x is
0
to
4
/SYS/SP
SP
/SYS/PS
x Power supply x , where x is either
0
or
1
/SYS/PDB
PDB
/SYS/DBP
Drive backplane
Related Information
■
“Display Faults (
show faulty
Command)” on page 47
■
“Display Faults (
faultmgmt
Shell)” on page 48
■
“Clear a Fault Manually” on page 50
Troubleshooting (Oracle ILOM Legacy Targets)
Oracle ILOM legacy targets identify environmental conditions of hardware components. You
must enable Oracle ILOM legacy targets before you can perform these diagnostics. See “Enable
Oracle ILOM Legacy Targets” on page 35 .
Note -
You need to enable Oracle ILOM legacy targets only once.
■
“Display FRUID and Fault State for Specific Components” on page 52
Detecting and Managing Faults 51