Oracle netra X5-2, Руководство по обслуживанию

Страница: 97 / 274

Remove a SAS Drive
See “Detecting and Managing Faults” on page 21 .
Related Information
■
“Remove a SAS Drive” on page 97
■
“SAS Drive Configuration” on page 94
■
“SAS Drive LEDs” on page 94
■
“Verify a SAS Drive” on page 101
■
“Detecting and Managing Faults” on page 21
Remove a SAS Drive
Removing a SAS drive is a hot-swap operation. You must run commands on the server before
you remove the drive.
1. Determine which drive to remove.
See “Locate a Faulty Drive” on page 95 .
2. Consider your next step.
■
If you have not prepared for service, do so now. See “Preparing for Service” on page 61 .
■
If you are removing a drive as part of another component's removal or installation
procedure, go to Step 3 .
3. Remove the filter.
See “Remove the Filter” on page 89 .
4. Determine if you need to shut down the OS to remove the drive, and perform one
of these actions.
■
If the drive cannot be taken offline without shutting down the OS, follow instructions in
“Power Off the Server (Power Button - Graceful)” on page 69 then go to Step 7 .
■
If the drive can be taken offline without shutting down the OS, go to Step 5 .
5. Take the drive offline according to your OS.
See your OS documentation.
6. Verify that the drive's blue Ready-to-Remove LED is lit.
See “SAS Drive LEDs” on page 94 .
Servicing SAS Drives 97