Oracle netra X5-2, Руководство по обслуживанию

Страница: 186 / 274

Locate a Faulty DIMM
3.
Verify a DIMM is recognized.
-> show /System/Memory/DIMMs
/System/Memory/DIMMs
Targets:
DIMM_
x
DIMM_
y
...
->
where x , y , and so on, are the slot numbers where DIMMs are installed.
If a DIMM is not recognized, check its installation. See “Remove a DIMM” on page 187 .
4. Check the health of the individual DIMMs and verify their identity.
-> show /System/Memory/DIMMs/DIMM_
x
/System/Memory/DIMMs/DIMM_7
Targets:
Properties:
health = OK
health_details = -
...
->
where x is the number of the DIMM, from
0
to
23
.
If the
health_details
property identifies the DIMM as faulty, or the DIMM cannot be
identified, replace it. See “Remove a DIMM” on page 187 .
5. Verify that a DIMM is faulty.
If a DIMM is faulty, you will see
/SYS/MB/P
x
/D
y under the
Value
heading where:
■
x is
0
or
1
.
■
y is
0
to
11
.
For example:
-> show faulty
Target | Property | Value
--------------------+------------------------+-------------------------------
/SP/faultmgmt/0 | fru | /SYS/MB/P0/D7
...
->
If a DIMM is faulty, replace it. See “Remove a DIMM” on page 187 .
If a FRU value different from
/SYS/MB/P
x
/D
y is displayed, see “Component Service Task
Reference” on page 65 to identify which component is faulty.
6. Use the Oracle ILOM
faultmgmt
shell to identify the faulty component.
186 Netra Server X5-2 Service Manual • October 2016