Oracle netra X5-2, Руководство по обслуживанию

Страница: 238 / 274

Determine if the PDB Is Faulty
See “Interpreting Diagnostic LEDs” on page 30 .
2. In Oracle ILOM, check the health of the power system.
-> show /System/Power
/System/Power
Targets:
Properties:
health = OK
health_details = -
...
->
If the
health_details
property identifies a faulty PDB, replace it. See “Remove the
PDB” on page 239 .
3.
Verify that the PDB is faulty.
If the PDB is faulty, you will see
/SYS/PDB
under the
Value
heading.
For example:
-> show faulty
Target | Property | Value
--------------------+------------------------+-------------------------------
/SP/faultmgmt/0 | fru | /SYS/PDB
...
->
If the PDB is faulty, replace it. See “Remove the PDB” on page 239 .
If a FRU value different from
/SYS/PDB
is displayed, see “Component Service Task
Reference” on page 65 to identify which component is faulty.
4. Use the Oracle ILOM
faultmgmt
shell to identify the faulty component.
See “Display Faults (
faultmgmt
Shell)” on page 48 .
Check the
Fault class
and
Description
fields for more information.
If the PDB is faulty, replace it. See “Remove the PDB” on page 239 .
5. Within the Oracle ILOM interface, verify that the PDB is reporting temperatures.
-> show /SYS/PDB/T_IN_PS
x
value
/SYS/PDB/T_IN_PS
Properties:
value = 26.000 degree C
->
If an unreasonable temperature or no temperature is displayed, replace the PDB. See “Remove
the PDB” on page 239 .
238 Netra Server X5-2 Service Manual • October 2016