Oracle netra X5-2, Руководство по обслуживанию

Страница: 239 / 274

Remove the PDB
6.
If you are unable to determine if the PDB is faulty, seek further information.
See “Detecting and Managing Faults” on page 21 .
Related Information
■
“Remove the PDB” on page 239
■
“Verify the PDB” on page 245
■
“Detecting and Managing Faults” on page 21
Remove the PDB
Removing the PDB is a cold-service operation. You must power off the server before you
remove the PDB.
1. Consider your first step.
■
If you have not prepared for service, do so now. See “Preparing for Service” on page 61 .
■
If you are removing the PDB as part of another component's removal or installation
procedure, go to Step 2 .
2. Review this information and complete these prerequisites in this order.
■
“Remove a Power Supply” on page 122
Remove both power supplies.
■
“Remove the Filter” on page 89
■
“Remove a Fan Module” on page 132
Remove all fan modules.
■
“Remove the Fan Tray” on page 80
■
“Rotate the Drive Cage to the Service Position” on page 82
■
“Remove the USB Flash Drive” on page 150
■
“Remove the Air Duct” on page 83
■
“Remove a DIMM” on page 187
Remove all DIMMs.
■
“Remove the PSU Duct” on page 87
■
“Remove the Motherboard” on page 230
Servicing the PDB 239