manualshive.com logo in svg

Oracle netra X5-2, Руководство по обслуживанию, Страница: 48 / 274

Поделиться
Скачать
Oracle netra X5-2 Скачать руководство пользователя страница 48

Display Faults (

faultmgmt

 Shell)

 faults/0           |                        | 
/SP/faultmgmt/0/    | fru_serial_number      | C40003 
 faults/0           |                        | 
/SP/faultmgmt/0/    | product_serial_number  | 1133BDN082 
 faults/0           |                        | 
/SP/faultmgmt/0/    | chassis_serial_number  | 1133BDN082 
 faults/0           |                        | 
/SP/faultmgmt/0/    | detector               | /SYS/PS0/PWROK 
 faults/0           |                        | 
...

Related Information

■

“Display Faults (

faultmgmt

 Shell)” on page 48

■

“Clear a Fault Manually” on page 50

■

“Resettable Targets” on page 51

Display Faults (

faultmgmt

 Shell)

Note - 

The Oracle ILOM CLI includes implementations of Oracle Solaris fault manager

commands, such as 

fmadm

 and 

fmdump

, within the Oracle ILOM CLI shell. This feature is

referred to as the Oracle ILOM 

faultmgmt

 shell. For more information about the Oracle Solaris

fault manager commands, refer to 

Server Administration

 and the Oracle Solaris documentation.

1.

Access Oracle ILOM.

See 

“Access the SP (Oracle ILOM)” on page 28

.

2.

Access the 

faultmgmt

 shell.

-> 

start /SP/faultmgmt/shell

Are you sure you want to start /SP/faultmgmt/shell (y/n)? 

y

3.

At the 

faultmgmtsp>

 prompt, display any current faults.

faultmgmtsp> 

fmadm faulty

No faults found
faultmgmtsp>

If a fault is found, information about the fault is displayed in seven fields:

■

Heading – The time, UUID, MSGID, and severity of the fault are displayed.

■

Fault class

 – A categorization of the fault according to the component and type of fault.

■

FRU

 – The Oracle ILOM target, part number, and serial number of the faulted component.

48

Netra Server X5-2 Service Manual • October 2016

Содержание netra X5-2



















































































































































































































































































Отзывы:

Нет отзывов