background image

 RGN-3GSF Release 5.7 User Guide, 3005-9800 REV-11

 

3

Specifications

The card specifications are listed in the following tables:

Table 1 lists the RGN-3GSF card technical specifications

Table 2 lists the RGN-3GSF card ordering information

Note: 

For SFP specifications, refer to the Optelian Pluggable Modules Product Guide (document 

number 3019-4100).

Table 1:  RGN-3GSF technical specifications

Note: 
1.

To operate in this extended temperature range, the RGN-3GSF must be installed in the OMS-2190 shelf and must be populated 
with SFP modules that support this temperature range (see the Optelian Pluggable Modules Product Guide, 3019-4100). 

Table 2:  Ordering information

Parameter

Specification

Data rate

100 Mb/s to 2.7 Gb/s

Jitter generation, transfer, tolerance

Telcordia GR-253

Eye mask

Telcordia GR-253 and IEEE 802-3ae

Power consumption (without SFP moduless)

7W (maximum)

Operating temperature

-40°C to 65°C (-40°F to 149°F)

Storage temperature

-40°C to 85°C (-40°F to 185°F)

Extended operating temperature

-40°C to 65°C (-40°F to 149°F) 

(1)

Relative humidity

5% to 95% non-condensing

DC power supply

-48 VDC nominal

Dimensions

17.5 x 3.0 x 22.8 cm (6.9 x 1.2 x 9.0 in.)

Optical connectors

LC/PC

Platform

Optelian OMS-7190, OMS-2190, OMS-719, OMS-519, and 
OMS-219 mounting shelves

Part number 

Model number

Description

1004-2100

RGN-3GSF

2.7 Gb/s multi-protocol dual transponder

Содержание RGN-3GSF




































Отзывы: