RGN-3GSF Release 5.7 User Guide, 3005-9800 REV-11
24
Table 6: RGN-3GSF SFP configuration and status parameters
Configure SFP protection parameters
The Protection tab provides access to configurable protection-switching parameters.
1.
In the shelf view of the ONM or OSM, double-click the card, or right-click the card and choose
Card
Config
from the drop-down menu.
2.
In the Configuration for Device screen, click an SFP
(SFP 1
to
SFP 4)
button, then click the
Protection
tab.
3.
In the Protection screen, specify the operating parameters as listed in Table 7.
Parameter
Value
Default
Description
Port Label
0 to 64 alphanumeric
character
N/A
User-specified label for the port
Transmitter
On (enabled)
Off (disabled)
On
(enabled)
When enabled, the SFP automatically turns
on when a valid signal is present, and off
when a signal is absent or invalid.
When set to Off, the SFP is disabled.
Regen Mode
2R
3R
3R
2R: regenerates and reshapes
3R: regenerates, reshapes, and re-times
Data Rate (Mbps)
N/A
N/A
Current data rate for the SFP transmit signal
Transmitter Power (dBm)
N/A
N/A
Current output power in dBm
Receiver Power (dBm)
N/A
N/A
Current input power in dBm
Wavelength (nm)
N/A
N/A
SFP transmit wavelength
SFP Type
N/A
N/A
Displays the type of Optelian SFP installed
preceded by
OEM
, or displays
Generic
when a third-party (non-Optelian) module
is installed.
Not Present indicates that the slot is empty.
