RGN-3GSF Release 5.7 User Guide, 3005-9800 REV-11
23
Configuring the RGN-3GSF SFPs
Clicking an SFP button (
SFP 1
or
SFP 4
) provides a set of tabs and interface-level attributes that can be
viewed and modified to provide specific applications. Each SFP can be configured individually.
This section provides the following module configuration procedures:
•
“Configure SFP operating parameters” on page 23
•
“Configure SFP protection parameters” on page 24
•
“View SFP advanced parameters” on page 26
Configure SFP operating parameters
1.
In the shelf view of the ONM or OSM, double-click the card, or right-click the card and choose
Card
Config
from the drop-down menu.
2.
In the Configuration for Device screen, click an SFP
(SFP 1
to
SFP 4)
button, then click the
SFP
tab.
3.
In the SFP screen, specify the operating parameters as listed in Table 6.
4.
Click
Apply
to implement the configuration, and click
Save Config
to save the settings
