Optek CONTROL 200, Инструкция по эксплуатации

Страница: 99 / 135

C200 S
OFTWARE
Instruction Manual C200 Part2 A1.doc
optek Danulat GmbH • D-45356 Essen • Germany page 77
5.2.6 Configure Clock
Note. The Configure Clock function is available only if the option board is fitted and analog features enabled – see
Section 6.2.3 .
Set Clock
Set the system clock.
Return to main menu.
Option board fitted and Serial Communications feature enabled)
Single input analyzer and option board not fitted – see Section 5.2.7
.
Dual input analyzer and option board not fitted – see Section 5.2.8.
Date Format
Select the required date format.
Date
Set the date in the format selected above.
Press to move between the day, month and year fields.
Use the and keys to adjust each field.
Time
Set the time in the format hh:mm.
Press
SIDESCROLL to move between the hours and minutes fields.
Use the UP and DOWN keys to adjust each field.
Press
UP to Set and Press DOWN to Abort are shown alternately on the lower
display line.
Press the appropriate key to set the clock or abort the changes.
Set Clock?
-----
Date 01:02:04
-----
Day
Time 12:00
Set
-----
CONFIG. CLOCK
-----
-----
Format
-----
Press To Set
Press To Abort
Set
Hours
CONFIG. SERIAL
CONFIG. CLOCK
CONFIG. SECURITY
Set Clock?
mm:dd:yy
dd:mm:yy
CONFIG. CONTROL