Optek CONTROL 200, Инструкция по эксплуатации

Страница: 110 / 135

C200 S
OFTWARE
Instruction Manual C200 Part2 A1.doc optek Danulat GmbH • D-45356 Essen • Germany page 88
6.1.3 Factory Settings
FACTORY SETTINGS Factory Set Code Cal. Sensor A
A:mV Zero (-1V)
A:mV Span (+1V)
A:T.Zero (100R)
A:T.Span (150R)
Cal. Sensor B
B:T.Zero (100R)
B:T.Span (150R)
Cal. Output 1
O1: Adjust 4mA
O1: Adjust 20mA
To
OPERATING PAGE
A:T.Zero (1K0)
B:T.Zero (1K0)
A:T.Span (1K5)
B:T.Span (1K5)
Available only if the Option Board is fitted
and Analog features enabled – see Section 7.3
Key
Cal. Output 3 Cal. Output 4
O3: Adjust 4mA O4: Adjust 4mA
O3: Adjust 20mA O4: Adjust 20mA
Cal. Output 2
O2: Adjust 4mA
O2: Adjust 20mA
Use the Sidescroll Key to scroll through the Pages within each Menu
Use the Menu
Key to scroll
through
the Menus
Use the Downscroll
Key to scroll through
the Frames
within each Page
Section 7.3, Page 58
A:T.Span (5K0)
A:T.Zero (2K0)
B:mV Span (+1V)
B:T.Zero (2K0)
B:T.Span (5K0)
B:mV Zero (-1V)
Dual input analyzer only
Alter Fact.Code Option Board
Note. The
Option Board
page is
displayed only if the Option Board is fitted.
89